# Skirting Board Calculator

Metres and lengths from perimeter and doorways, with waste.

- Page: https://jianzhujisuan.com/en/skirting
- Category: Finishes (https://jianzhujisuan.com/en/c/finishes)
- Chinese version: https://jianzhujisuan.com/zh/skirting.md
- Data checked: 2026-10-25

## Quick result

With the default inputs (Room perimeter 18 m, Doorways 2 pcs, Doorway width 0.9 m, Length per piece 2.4 m, Waste 5%): **Net length 16.20 m**

## Inputs

| Parameter | Type | Default | Unit | Note |
|---|---|---|---|---|
| Room perimeter | number | 18 | m |  |
| Doorways | number | 2 | pcs |  |
| Doorway width | number | 0.9 | m |  |
| Length per piece | number | 2.4 | m |  |
| Waste | number | 5 | % | 8-10% in rooms with many internal corners |

## Formula

- **Net length**: L = perimeter − doorways × width
- **With waste**: L = net × (1 + waste)
- **Pieces**: n = ceil(L ÷ piece length)
- **Offcut**: n × piece length − L

## Worked example

An 18 m perimeter with two 0.9 m doorways, 2.4 m pieces at 5% waste: 16.2 m net, 17.01 m with waste, so 8 pieces totalling 19.2 m and 2.19 m spare.

## Questions

### What height should skirting be?

80-120 mm is common domestically, 100-150 mm commercially, and 40-60 mm for minimal interiors. Match the door architrave: skirting usually equals or slightly under its width. Too low and it fails to protect the wall base from mopping; too high and it visually lowers the ceiling, especially in small rooms.

### How are corners handled?

Internal corners are usually butt-jointed; external corners need 45° mitres that close tightly. Tile skirting uses corner trims or 45° chamfers. Every cut should be filled with filler or colour-matched compound, or it collects dirt and darkens. Corners are where the standard of work shows.

### Flooring or skirting first?

Flooring first, then skirting, so the skirting covers the expansion gap between floor and wall. Skirting first leaves the flooring unable to reach the wall, with an ugly exposed edge and restricted movement that causes buckling. Leave an 8-10 mm gap for the skirting to hide.

## Related tools

- [Paint Coverage Calculator](https://jianzhujisuan.com/en/paint-coverage): Enter room size, ceiling height, openings and number of coats to get total area, litres needed and how many cans to buy.
- [Tile Calculator](https://jianzhujisuan.com/en/tile-count): Enter the area to cover, pick a tile size and waste factor to get tiles and boxes required.
- [Flooring Quantity Calculator](https://jianzhujisuan.com/en/flooring): Planks and packs from room size and board format, with waste by laying pattern.
- [Wallpaper Roll Calculator](https://jianzhujisuan.com/en/wallpaper): Drops and rolls from perimeter, height and pattern repeat.
- [Ceiling Grid Calculator](https://jianzhujisuan.com/en/ceiling-grid): Main and cross runner lengths, hangers and fittings from ceiling size.
- [Plasterboard Quantity Calculator](https://jianzhujisuan.com/en/gypsum-board): Sheets, screws and joint tape from area, sheet size and layers.

---

Generated by BuildCalc. All calculations run in your browser; no data is uploaded. Formulas follow national standards and common trade practice; local codes govern.